Controlled Variable Oxidative Doping of Individual Organometallic Nanoparticles

The charging and controlled oxidative doping of single organometallic ferrocene nanoparticles is reported in aqueous sodium tetrafluoroborate using the nano‐impacts method. It is shown that ferrocene nanoparticles of approximately 105 nm diameter are essentially quantitatively oxidatively doped with the uptake of one tetrafluoroborate anion per ferrocene molecule at suitably high overpotentials. By using lower potentials, it is possible to achieve low doping levels of single nanoparticles in a controlled manner.     

Approaching the Integer‐Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross‐Coupling

A library of symmetrical linear oligothiophene was prepared employing decarboxylative cross‐coupling reaction as the key transformation. Thiophene potassium carboxylate salts were used as cross‐coupling partners without the need of co‐catalyst, base, or additives. This method demonstrates complete chemoselectivity and is a comprehensive greener approach compared to the existing methods. The modularity of this approach is demonstrated with the preparation of discreet oligothiophenes with up to 10 thiophene repeat units. Symmetrical oligothiophenes are prototypical organic semiconductors where their molecular electrical doping as a function of the chain length can be assessed spectroscopically. An oligothiophene critical length for integer charge transfer was observed to be 10 thiophene units, highlighting the potential use of discrete oligothiophenes as doped conduction or injection layers in organic electronics applications.     

Nitrogen Doping and Carbon Coating Affects Substrate Selectivity of TiO2 Photocatalytic Organic Pollutant Degradation

A series of carbon-coated, nitrogen-doped titanium dioxide photocatalysts was produced and characterized. N-doped TiO₂ powder samples were prepared using a sol-gel method and subsequently used for making doped-TiO₂ thin films on glass substrates. Carbon layers were coated on the films by a thermal decomposition method using catechol. Diffuse reflectance spectra and Mott-Schottky analyses of the samples proved that nitrogen doping and carbon coating can slightly lower the band gap of TiO₂, broaden its absorption to visible light and enhance its n-type character. According to photocatalytic tests against model contaminants, carbon-coated nitrogen-doped TiO₂ films have better performance than simple TiO₂ on the degradation of Rhodamine B dye molecules, but are poorly effective for degrading 4-chlorophenol molecules. Several possible explanations are proposed for this result, supported by scavenging experiments. This reveals the importance of a broad substrate scope when assessing new photocatalytic materials for water treatment, something which is often overlooked in many literature studies.     

HfSe2 monolayer stability tuning by strain and charge doping

Strain and charge doping are the effective ways to modulate the electronic and phonon properties of materials. The effects of biaxial tensile strains and charge dopings on the stabilities of HfSe₂ monolayer have been systematically investigated using first-principles methods. Its two-dimensional Young's modulus is only 65.4 N/m, and it is easy to be stretched. When the tensile strain is applied on HfSe₂ monolayer, two of its phonon modes soften with one frequency decreasing to zero at critical strain. Our results show that electron and hole dopings could suppress the softening of phonon modes, and significantly enhance the ideal strength by 28% and 36%, respectively. The calculations for electronic structures and phonon dispersions provide the theoretical references for future nano-device designing.     

Effects of lanthanides doping on the optical properties of graphene/WSe2 heterostructure based on ab-initio calculations

Based on the density functional theory, we discussed the electronic and optical properties of graphene/ WSe₂ (GW) heterostructure after lanthanides doping. Red shift appears and the optical parameter values are improved in the low energy region after the lanthanides are doped. Different doping types are also discussed. In the case of single doping, substitute Yb atom on W site will improve the peak values of the optical parameters greatly. In the case of co-doping, it is found that the effect will be more obvious when the two doped lanthanide atoms are located in the second neighboring positons. These results suggest that lanthanides doping does adjust the electronic structure and improve the optical properties of GW heterostructures, which providing useful guidance for the design of novel optical nanodevices based on two-dimensional materials.     

Study of water uptake in poly(ether ether ketone) irradiated by MeV O+ and Au+ ions

Poly(ether ether ketone) (PEEK) was irradiated with 4?MeV O⁺ and 5 and 10?MeV Au⁺ ions to the fluences from 10¹² to 10^14?cm^?2 and then treated in 5 M/l water solution of LiCl for one month at room temperature. After drying and removal of LiCl surface contamination, the depth distribution of LiCl embeded in PEEK was measured by the neutron depth profilig method (NDP) sensitive to ⁶Li isotope. Embeded LiCl is believed to map distribution of water diffusing into PEEK interior. The results show that the PEEK irradiated to the fluences above 1.10¹³cm^?2 is prone to water penetration to the depths of few microns. On the pristine PEEK and that irradiated to lower ion fluences only a surface Li contamination is observed.     

One-step ultrasonic synthesis of Co/Ni-catecholates for improved performance in oxygen reduction reaction

The inherent periodically arranged M−N_X, M−S_X and M−O_X units (M are usually Fe, Co, Ni, etc.) in metal–organic frameworks (MOFs) can be promising active centers in electrocatalysis. In previous studies, MOFs were usually constructed by energy-consuming hydro- or solvo-thermal reactions. Ultrasonic synthesis is a rapid and environment-friendly technique when envisaging MOFs’ industrial applications. In addition, different synthetic pathways for MOFs may lead to difference in their microstructure, resulting in different electrocatalytic performance. Nevertheless, only a handful of MOFs were successfully prepared by ultrasonic synthesis and few were applied in electrochemical catalysis. Herein, we constructed Ni/Co-catecholates (Ni/Co-CATs) synthesized by one-step ultrasonic method (250 W, 40 KHz, 25 W/L, Ultrasonic clearing machine) and compared their performance in oxygen reduction reaction (ORR) with that of Ni/Co-CATs synthesized by hydrothermal method. Ni-CAT and Co-CAT prepared by ultrasonic showed the half-wave potential of −0.196 V and −0.116 V (vs. Ag/AgCl), respectively. The potentials were more positive than those prepared by hydro-thermal method. And they showed excellent electrochemical stability in neutral solution. The latter was only 32 mV lower than that of commercial Pt/C. The improved performance in ORR was attributed to higher specific surface area and mesopore volume as well as more structural defects generated in the ultrasonic synthesis process, which could facilitate their exposure of electrocatalytic active sites and their mass transport. This work gives some perspective into cost-effective synthetic strategies of efficient MOFs-based electrocatalysts.     

Electric field induced non-linear multisubband electron mobility in V-shaped asymmetric double quantum well structure

ABSTRACT

We study the effect of the external electric field F_ext on the low-temperature electron mobility μ in an asymmetrically doped Al_xGa_1-xAs based V-shaped double quantum well (VDQW) structure. We show that nonlinearity of µ occurs under double subband occupancy on account of intersubband effects. The field F_ext alters the VDQW potential leading to transfer of subband wave functions between the wells, which affects the scattering potentials and hence μ. In the VDQW structure, due to the alloy channel layer, the alloy disorder (Al-) scattering happens to be significant along with the ionised impurity (Imp-) scattering. The non-linear behaviour of μ is because of μ^Imp, while the overall magnitude of μ is mostly due to μ^Al. The increase of difference in the doping concentrations of the outer barriers increases the nonlinearity of μ. The oscillatory character of μ is amended by varying the width of the well and barrier and also the height of the VDQW. Our results can be used to study VDQW based nanoscale field effect transistor structures.